Barbed fitting 10mm (3/8") G1/4"

suitable for tube with 10mm inner diameter.

Delivery Time: Temporarily out of stock

Incl. 19% Tax



Technical details:
Color: silver nickel
Compatibility: Stiff tubing (PUR), Soft tubing (PVC, Silikon, Neoprene)
Material: Brass
1. Side: Barbed fitting 10mm (3/8")
2. Side: G1/4" G1/4" outer thread

Robust  high-quality nickel plated barbed fitting with cylindrical thread (G1/4"). The fitting is suitable for PVC, PU, PA, silicone and PE hoses with an inner diameter of 10mm. With integrated 1/4" Perbunan(r) O-Ring seal.
We recommend the use of hose clamps or zip ties for best possible safety!

Note for watercooling beginners:
The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.

10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required

Additional Info

Additional Info

Lieferzeit Temporarily out of stock

General Information

Please note: Most manufacturers do not intend their hardware for removal of the original heatsinks. Therefore a loss of warranty must be expected when exchanging coolers. We are not liable for any damages occurring or being caused before, during or after installation or any other resulting damages. Please work accordingly careful with your hardware and extensively test for correct installation and tightness of the system before booting up your PC! Check all new hardware for correct operation before mounting any waterblocks to cover possible previous damages before loosing warranty!